Siemens 7482255 Rev 01 Page 1 of 2
October 2002
Appendix H - Fastener Reference
Appendix H: Fastener Reference
The threaded fasteners employed in the assembly of the G50 and the G60 S exhibit the
characteristics listed in Table H-1. See Figure H-1 for an example of the S3x8 screw, and
Figure H-2 for an example of the CK3x8 screw.
Table H-1 Fastener Characteristics
Screw Reference Screw Dimensions Screw Type
S3x6 M3x6 Flat head
S3x8 M3x8 Flat head
CK3x4 M3x4 Binding head, with external lock washer
CK3x6 M3x6 Binding head, with external lock washer
CK3x8 M3x8 Binding head, with external lock washer
CK4x8 M4x8 Binding head, with external lock washer
S4x10 M4x10 Flat head
CK4x12 M4x12 Binding head, with external lock washer
CR5x10 M5x10 Pan head, with spring lock and flat washers
Figure H-1 S3x8 (M3x8 Flat Head Screw)
Figure H-2 CK3x8 (M3 Binding Head with External Lock Washer)
To Next Page
Loading...
