Siemens SR53HS52ME User Manual

Troubleshooting
Disturbance Cause
and troubleshooting
5.
Take the strainer out of the inlet hoseE:32-00 lights up
Change or display
for water supply
shines.
6.
Clean the sieve.
7.
Place the strainer in the inlet hose.
8th.
Screw on the water connection.
9.
Check the water connection for leaks.
10.Connect the
power supply.
11.Turn
on the device.
E:34-00 lights up
Change.
Water constantly flows into the device.
1.
Close the faucet.
2.
Call customer service → Page 54 .
E:61-02 lights up
Change.
No device error. Wastewater pump is blocked or the
wastewater pump cover is loose.
1.
Clean the wastewater pump.
→
"Cleaning the wastewater pump", page 52
2.Snap the waste water pump cover into place
correctly.
→
"Cleaning the wastewater pump", page 52
47

Siemens SR53HS52ME Specifications

General

Brand	Siemens
Model	SR53HS52ME
Category	Dishwasher
Language	English