Powermite 599 MZ Series SSB Electronic Valve Actuator Technical Instructions
24 Vac 3-position Control Document No. 155-195P25
December 18, 2003
Start-Up
Check the wiring and the position indication.
EA0588R3
Position indicator at 0
(Output shaft is retracted)
Position indicator at 1
(Output shaft is extended)
Figure 7. Position Indicator.
Troubleshooting
Check Wiring for proper connections.
Service Kits
See Accessory and Service Kits for available accessory and service parts.
If the actuator is inoperative, replace the unit.
Dimensions
Figure 8.
Dimensions of the SSB Actuator. Dimensions Shown in Inches (Millimeters).
Service envelope
Minimum access space recommended:
8 inches (200 mm) above the actuator and beside the terminal plug.
EA0589R2
1-7/8
(48)
3-1/4
(83)
3-7/8
(98)
3-1/8
(79)
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. Other product or company names mentioned herein may be the trademarks of their respective owners. ©
2003 Siemens Building Technologies, Inc.
Siemens Building Technologies, Inc.
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
Your feedback is important to us. If you have comments
about this document, please send them to
technical.editor@siemens.com
U.S.A.
Document No. 155-195P25
Printed in the U.S.A.
Page 5