Siemens SSC161.05UT - Product Documentation and Notes; Product Documentation References; Engineering and Safety Notes; Mounting Precautions

4
Siemens
A6V13359035_en--_b
Smart Infrastructure
2023-05-16
Combinable room thermostats
Type
Detail
RDG..
RDG160KN, RDG160T, RDG260, RDG405KN
RDU..
RDU340
RCU..
RCU50..
Product documentation
Topic
Title
Document ID
Mounting and installation
Mounting instructions
A6V13463377
Standards and directives
CE declarations
A5W00254962A
RCM conformity
A5W00254983A
Environmental compatibility
Environmental declarations
A5W00244689A
Related documents such as the environmental declarations, declarations of conformity, etc.,
can be downloaded from the following Internet address:
www.siemens.com/bt/download
Notes
Engineering
The actuators must be electrically connected in accordance with local regulations (see
"Connection diagram [▶ 13]").
CAUTION
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
● Observe national provisions and comply with the appropriate safety regulations.
Observe permissible temperatures (see "Technical data [▶ 10]").
Mounting
WARNING
● Do not use pipe wrenches, pliers or similar tools.
● Avoid lateral pressure or (cable) tension on the mounted actuator!
Valve and actuator are easy to assemble on site before commissioning:
● Remove protective cover from the valve body.
● Position the actuator and tighten the union nut manually.
● See "Mounting instruction" for graphical instructions.