Siemens SSE161.05U - Product Documentation References; Installation and Compliance Documents; Important Notes and Guidance; Engineering and Safety Notes

4
Siemens
A6V12681514_enUS_b
Smart Infrastructure
06/15/2023
Note: To ensure trouble-free operation of
third-party valves with the SSE/SSF..
actuators, the valves must satisfy the
following requirements:
● Threaded connections with coupling nut
M30 × 1.5.
● Nominal force F ≤ 45 lbf (200 N)
● Dimension X ≥ 0.33 in (8.3 mm)
● Dimension Y ≤ 0.58 in (14.8 mm)
Product documentation
Topic
Title
Document ID
Installation
Mounting instruction
A6V13122037
Standards and directives
CE declarations
A5W00254962A
RCM conformity
A5W00254983A
Environmental compatibility
Environmental declarations
A5W00242127A
Related documents such as the environmental declarations, declarations of conformity, etc.,
can be downloaded from the following Internet address:
www.siemens.com/bt/download
Notes
Engineering
The actuators must be electrically connected in accordance with local regulations (see
"Connection diagrams”).
CAUTION
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
● Observe national provisions and comply with the appropriate safety regulations.
Observe permissible temperatures (see "Technical data [▶ 8]").
Mounting
WARNING
● Do not use pipe wrenches, pliers or similar tools.
● Avoid lateral pressure or (cable) tension on the mounted actuator!
Valve and actuator are easy to assemble on site before commissioning:
● Remove protective cover from the valve body.
● Position the actuator and tighten the union nut manually.
● See "Mounting instruction" for graphical instructions.