Siemens ST750 - Cabinet Characteristics; Environmental; Temperature; Table 5 - ST750 Cabinet Assembly Size and Weight

ST750 GENERAL HANDBOOK
667/HB/33750/000 Page 31 Issue 6
2.10 Cabinet Characteristics
The ST750 Outer case is a single sided access cabinet with the following
dimensions:
Small outer case –
Height
1200mm
Width
466mm
Depth
370mm
Approximate weight of cabinet and stool, including one Gemini, and
two Loop Detector cards
47Kg
Large outer case -
Height
1157mm
Width
730mm
Depth
426mm
Approximate weight of cabinet and stool, including one Gemini, and
two Loop Detector cards
50Kg
Table 5 – ST750 Cabinet Assembly Size and Weight
For more details on the Small and Large cabinets refer to section 4.1
The case is manufactured in grey or black powder coated aluminium.
In addition to the screw-locks, the main controller door is fitted with a S18 lock.
There is a facility to change the S18 lock to a Yale with an RKA27C pattern barrel.
Note
The key lock should not be operated unless the screw locks are tight, i.e.
Unlock the case before undoing the screw lock and only lock the case after
tightening the screw locks.
The lock used on the Manual Panel is a small Yale lock with a 900 pattern barrel.
2.11 ENVIRONMENTAL
2.11.1 Temperature
The ST750 in a grey outercase is designed to operate in external ambient
temperatures of –25ºC to +65ºC.
Its use in countries where high levels of solar radiation are expected with longer
periods of exposure may impose power restrictions on the ST750 hardware