Siemens Synco 200 - Page 18

The following example shows the above information. The table shows an Info page
for the user (top) and a main menu page (bottom):
Example of Info
page and main menu
Display Explanation
°C
SET
1
Actual value Present setpoint
Info level:
• The navigation buttons " + " / " – " switch the
display between the various Info pages
• Number and presentation of Info pages depend
on the selected application
• The pages are arranged as an infinite sequence
°C
SET
SET
1
Main menu:
• The navigation buttons switch the display
between the various data points (e.g. to the
SETHEAT setpoint in this example)
• Change values:
1. Press the OK button.
2. Use the navigation buttons to change the
value (e.g. to 21.0 °C in this example).
3. Press the OK button => the new value is
adopted.
18 / 174
Siemens Universal Controllers RLU2… CE1P3101en
Building Technologies Operation 29.08.2008