Siemens Synco living - Actual Value of the Room Temperature; Room Temperature Setpoint Current; Valve Position; Cooling Release Output

39 / 100
Siemens Synco™ living Operating instructions CE1B2707en
Building Technologies Central apartment unit QAX910 23.08.2008
Monda
y
From 06:00 Com
f
To delete a switching point, press the
Arrow buttons until “- - : - -“ appears
(before 00:00 and after 24:00).
Actual value of the room temperature
The central apartment unit can display the actual value of the room tempera-
ture:
Main menu > Rooms > Room X > Room state > Act val room temp:
Room temperature setpoint current
The present room temperature setpoint can be queried:
Main menu > Rooms > Room X > Room state > Current RT setpoint:
Valve position
The current valve position (open 0..100%) in each room can be queried:
Main menu > Rooms > Room X > Room state > Valve position:
Cooling release output
The current cooling release output state (Off / On) can be queried for each
room:
Main menu > Rooms > Room X > Room state > Cooling release outp:
Air conditioner
The current operating state (Off/On) of the air conditioner can be queried for
each room:
Main menu > Rooms > Room X > Room state > Air conditioner:
Plant operation
The current plant state (Auto / Heating / Cooling) can be queried for each
room:
Main menu > Rooms > Room X > Room state > Plant operation:
- - : - -