Siemens Synco living - Stage Assignment to Operating Modes; Stage Assignment to Window States

47 / 100
Siemens Synco™ living Operating instructions CE1B2707en
Building Technologies Central apartment unit QAX910 23.08.2008
Stage setpoints
Stage assignment to operating modes
The individual ventilation operating modes can be assigned to the correspond-
ing ventilation stages via stage setpoints.
This setting has no influence, if ventilation is controlled by relative
humidity or air quality.
Main menu > Ventilation > Stage setpoints > Comfort:
Main menu > Ventilation > Stage setpoints > Precomfort:
Main menu > Ventilation > Stage setpoints > Economy:
Main menu > Ventilation > Stage setpoints > Protection:
Factory setting Setting
Comfort
Stage 1  Off
 Stage 1
 Stage 2
 Stage 3
Precomfort
Stage 1  Off
 Stage 1
 Stage 2
 Stage 3
Economy
Off  Off
 Stage 1
 Stage 2
 Stage 3
Protection
Off  Off
 Stage 1
 Stage 2
 Stage 3
Stage assignment to window states
Specify the stage for ventilation when the central apartment unit detects an
open window (see page 54).
Main menu > Ventilation > Stage setpoints > Window open:
Factory setting Off
Setting  Off
 Stage 1
 Stage 2
 Stage 3