Siemens Synco living - Inputs; Outputs; Displaying Input Signals; Displaying Output States

72 / 100
Siemens Synco™ living Operating instructions CE1B2707en
Building Technologies Central apartment unit QAX910 23.08.2008
Inputs / Outputs
Inputs
Displaying input signals
The current input signals can be displayed via the following operating line:
Main menu > Inputs / Outputs > Inputs > …
The following values – if available – are displayed:
• Actual value of the outside temperature
• Outside temperature mixed
• Outside temperature attenuated
• Operating mode contact
• Summer mode
• H/C changeover
• Absence
• Twilight
• Fault input X (per fault input 1 - 8)
Outputs
Displaying output states
The states of the outputs can be displayed via the following operating line:
Main menu > Inputs / Outputs > Outputs > …
The following values – if available – are displayed:
• Switching group X (relay per switching group 1 - 8)
• Fault output X (per fault output 1 and 2)
• Heat demand relay
• Heat demand DC 0..10 V
• Summer operation
• Status output
• Window / door state
• Exhaust hood