Siemens Synova FC330A - Page 105

Fire Safety & Security Products
Building Technologies
1583_o_en_−−_5
101
08.2005
5.21 EDITING user text via keypad
Also possible via PC-tool SWE330A (see page 66)

Press «Start/stop» key and enter the password (0055 ok)
SELECT: 1. ENabling
(main menu) 2. DISabling
3. INFO polling
4. other functions
FUNCTIONS: 1. function
(4) 2. system TEST
3. printout
4. configuration
CONFIGURATION: 1. user functions
(4.4) 2. user text
3. service functions
4. erase functions
Display
Note:
LCD-text shown is based on software program ’English international’

Select ‘2. ok’
EDITING user text
> enter password?
hm: back to menu Stop: end operating
(Code 0011 )
DEFINE 1. editing
USER text: 2. linking to Fire zone
(4.4.2) 3. linking to Fire elem
4. UNlinking Fire zn./el.
= input or change user text
= assign user text to ZONE
= assign user text to ELEMENT
##

Select ‘1. ok’
EDITING user text
> select TEXT?
hm: back to menu Stop: end operating
Select user text
select NUMBER, LETTER, WORD: (0, F1, F2)
:_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
:_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Enter user text
max. 39 characters
0 = Enter digit 0,1,2 .....
F1 = Enter character a,b,c.....
F2 = Enter word from library word number
↑↓ = for switching from one line to the other
 Note:
− User texts are displayed only for ’Alarm’
− Each user text must be linked to a ZONE (also ELEMENT possible)
− If ELEMENT user text is used the ZONE user text is not shown at the LCD
− max. 200 user texts possible
2nd line only if
2 lines of user text
have been selected