Siemens Synova FC330A - Mounting of Optional Cards FC330 A-2-CH (4 Loops)

Fire Safety & Security Products
Building Technologies
1583_o_en_−−_2
26
08.2005
2.9 Mounting of optional cards FC330A-2-CH (4 loops)
K3M010/20 line extension card / K3M030 addressable loop extension card
K3G050 relay card / K3I090 pager interface card
K3L100 LED driver card
K3I080 RS232/LON converter card
K3I080
AWG/TNA
Z3G300
K3G050
or
K3L100
or
or
K3I090
AX1212 (12V /12Ah)
Screw in studs (contained in
K3M010/020/030) and fix line (loop)
extension card with 4 screws
Unfasten 4 screws of master
board
1
2
Screw on the 4 spacer bolts (contained in K3M010/20)
with 4 hexagonal nuts (contained in K3M030)
3
K3M030
K3M010
K3M020
and
or
Mount the card K3.... on the 2 center
studs as shown using 2 screws and
lock washers (contained in K3....)
4
Mount the 4 spacer bolts (L=25mm) onto the
card K3... as shown and fix mounting plate with 4
screws and lock washers (contained in Z3G300).
Then mount the AWG/TNA card with 4 spacer
bolts (L=6mm), screws and lock washers onto
the mounting plate.
5