en Getting to know your appliance
10
Controls
--------
--------
Button Meaning
k
Switch the appliance on and off
The appliance rinses automatically when it is switched on and off.
The appliance is not rinsed if:
■ it is still warm when switched on, or
■ coffee was not dispensed before the appliance was switched off.
The appliance is ready for use when the LEDs of the buttons for selecting drinks light
up in the control panel. The appliance has automatic switch-off. ~ "Selecting
automatic switch-off" on page 17
espresso Dispensing Espresso
caffe crema Dispensing Caffe crema
cappuccino Dispensing cappuccino
latte macchiato Dispensing latte macchiato
milk Frothing up milk
% Coffee strength
Adjusting the coffee strength ~ "Adjusting beverage settings" on page 14
calc’nClean Start the service programme
Flashes when the service programme needs to be performed.~ "Calc’nClean
service programme" on page 22
Symbol
'
Lights up when the water tank needs to be topped up with water or the water tank is not
inserted.
Flashes when the water filter needs to be replaced.
(
Lights up when trays need to be emptied.
Flashes when door of brewing chamber is open.
is continu-
ously lit
Ready to use, selection possible
is pulsing Dispensing underway
is flashing Waiting for operation, e.g. with calc’nClean
off Not available
To Next Page
Loading...
