For more technical support, please go to our website:
www.gillardcutting.com/technical
6
3. MACHINE FAULT
The screen below will be displayed if there is a serious system fault. This could be
internal communications or a safety related function. Hopefully this should never
appear.
The rst port or call is to check all of the safety sensors and emergency stops. The
monitoring of the safety circuits is very accurate and any discrepancy in the reading
of both channels
Pressing the yellow warning symbol will load the system diagnostic screen. Gillard
will need the information contain within to help you with your fault.
If you see this screen, please contact Gillard: tech@gillardcutting.com or call 01684
851989
To Next Page
Loading...
