For more technical support, please go to our website:
www.gillardcutting.com/technical
7
4. HOME SCREEN
This is the normal operator screen. All day to day cutting changes can be controlled
from this screen.
The screen is divided in three different parts: Caterpillar, Cutter and Batch. Each
area has its own panel where it is possible to select different settings. To open the
different panels, press on the green bottom bar.
4.1.1 Caterpillar
Start/Stop Caterpillar (Button):
To start conveyor belts, press the green button to start the transport belts. As an
indication the button will turn red plus graphic within the symbol will begin to rotate
to indicate movement.
To Next Page
Loading...
