Siemens UL 489 - Page 255

15 – 11
Mounting the locking module
(1) Socket head cap screw M5 with washer and nut
Installing the racking mechanism
Install the racking mechanism in the opposite order to that in which it was removed.
Knocking out the field on the front panel
1 Knock out the fields on the front panel using a suitable base
2 Deburr the edges
Then:
- Install front panel  (page 24-4)
1
2
3
Size
4
(1)
5 Nm
45 lb-in
1
2