Functions
8.4 Configuration
ULTRAMAT 23
134 Manual, 3/2016, A5E37100388-003
Figure 8-3 Overview of configuration of analyzer tests
Configuration: Inputs/outputs/pump
You can use this menu to assign certain functions to the fo
l-
wing elements:
Relays
Inputs and outputs
Furthermore, the following settings can be made using this
menu:
Synchronization of several analyzers
Pump response with AUTOCAL and in measuring mode
Configuration: Inputs/outputs/pump: Analog outputs
You can use this menu to parameterize the analog outputs. This
input always refers equally to all components.
To Next Page
Loading...
