Siemens ULTRAMAT 23 - Parts in Gas Path Wetted by Sample Gas

Description
3.4 Technical specifications
ULTRAMAT 23
34 Manual, 3/2016, A5E37100388-003
3.4.2
Parts in gas path wetted by sample gas
Gas path
19" rack unit
Bench-top unit
With hoses
Condensation trap at gas
inlet
-- PA6 (polyamide)
Condensation trap
--
PE (polyethylene)
Gas connections 6 mm
PA6 (polyamide)
PA6 (polyamide)
Gas connections ¼"
Stainless steel 1.4571
Stainless steel 1.4571
Hose
FKM
FKM
Pressure switch
PTFE + PA6 (polyamide)
PTFE + PA6 (polyamide)
Flowmeter
Borosilicate glass/steel 1.4878
Borosilicate glass/steel 1.4878
Elbows/T-pieces
PA6
PA6
Internal pump (optional) PVDF/PTFE/FKM/HD-PE/
stainless steel 1.4571
PVDF/PTFE/FPM/HD-PE/
stainless steel 1.4571
Solenoid valve FPM70/PA6/
stainless steel 1.4310/1.4305
FPM70/PA6/
stainless steel 1.4310/1.4305
Safety condensation trap
PA66/NBR/PA6
PA66/NBR/PA6
Analyzer chamber
● Body
● Lining
● Nozzle
● Window
● Adhesive
● O-ring
Aluminum
Aluminum
Stainless steel 1.4571
CaF
2
Epoxy resin
FKM
Aluminum
Aluminum
Stainless steel 1.4571
CaF
2
Epoxy resin
FKM
Piped (only
possible with-
out pump)
Gas connections 6 mm /
¼"
Stainless steel 1.4571
Pipes Stainless steel 1.4571
Analyzer chamber
● Body
● Lining
● Nozzle
● Window
● Adhesive
● O-ring
Aluminum
Aluminum
Stainless steel 1.4571
CaF
2
Epoxy resin-based adhesive
FKM
Aluminum
Aluminum
Stainless steel 1.4571
CaF
2
Epoxy resin-based adhesive
FKM
WARNING
Operation of analyzers in hazardous areas
For safe operation of the analyzer in hazardous areas, it is essential to observe the
information and conditions referred to in "Information pursuant to ATEX for use in
hazardous areas" (Order No.: A5E37888334)