Siemens US2:9810RC - Accessing Webpages for Data Viewing and Meter Configuration

Webpages 9810 series - User manual
149 7EN05-0390-08
Webpage Content
Date & Time Configure your meter’s time and time synchronization.
Preferences Enter your meter’s nameplate information.
Metering
•
Basic Settings
•
Advanced Settings
HTTPS Certificate Management.
Webpage Content
-
Custom. No default content.
By default, the Maintenance menu is empty and the menu is not
displayed until information is added to it.
Maintenance
Accessing webpages for data viewing and meter configuration
You can access the meter’s webpages through the meter’s Ethernet connection using a web
browser.
You must have cookies enabled to access your meter’s webpages.
You may need to configure your meter’s security settings to view webpages and configure your
meter using webpages.
On a hardware-locked meter, you cannot add, delete, or modify any webpage files.
If you are connected to your device over Ethernet, changing Ethernet configuration parameters
without another method of configuration enabled may cause loss of communications with your
device and render it inaccessible.
NOTICE
LOSSOFACCESS
Failure to follow these instructions can result in loss of access to the device.
Ensure you maintain sufficient access to communicate with and configure your device.
1. Open a web browser and enter your meter’s IP address in the address bar. The webpage
login prompt is displayed.
If the browser cannot connect to the webserver, check the web protocol setting.
2. Enter a valid username and password.
3. Select your desired Language from the drop-down list box, and click Log In.
Your meter’s webpages are displayed. The default page is the Monitoring webpage,
showing real-time data.