Siemens US2:9810RC - IEC 61000-4-30 Logs

IEC 61000-4-30 logs
The IEC 61000-4-30 logs are used to log parameters related to the International Electrotechnical
Commission’s IEC 61000-4-30 standard and to create reports:
4-30 3s RMS Log (Data Rec 38)
PqFlag 2s ivd I1 3s V1 OverDev 3s V3 OverDev 3s
V1 3s I2 3s V2 UnderDev 3s
V2 3s I3 3s V2 OverDev 3s
V3 3s V1 UnderDev 3s V3 UnderDev 3s
4-30 10mRMS Log (Data Rec 16)
PqFlag 10m PQA1 I1 10m V1 OverDev 10m V3 OverDev 10m
V1 10m PQA1 I2 10m V2 UnderDev 10m Power Freq 10m
V2 10m PQA1 I3 10m V2 OverDev 10m
V3 10m V1 UnderDev 10m V3 UnderDev 10m
4-30 2hrRMS Log (Data Rec 37)
PqFlag 2hr I1 2hr V1 OverDev 2hr V3 OverDev 2hr
V1 2hr I2 2hr V2 UnderDev 2hr Power Freq 2hr
V2 2hr I3 2hr V2 OverDev 2hr
V3 2hr V1 UnderDev 2hr V3 UnderDev 2hr
4-30 3s THD Log (Data Rec 26)
PqFlag 3s THD V3 THD 3s I3 THD 3s IUnbal u2 3s
V1 THD 3s I1 THD 3s Vunbal u2 3s IUnbal u0 3s
V2 THD 3s I2 THD 3s Vunbal u0 3s
4-30 10mTHD Log (Data Rec 27)
PqFlag 10m V3 THD 10m PQ I3 THD 10m IUnbal u2 10m
V1 THD 10m PQ I1 THD 10m Vunbal u2 10m IUnbal u0 10m
V2 THD 10m PQ I2 THD 10m Vunbal u0 10m
4-30 2hrTHD Log (Data Rec 34)
PqFlag 2hr V3 THD 2hr I3 THD 2hr IUnbal u2 2hr
V1 THD 2hr I1 THD 2hr Vunbal u2 2hr IUnbal u0 2hr
V2 THD 2hr I2 THD 2hr Vunbal u0 2hr
9810 series - User manual Logging
7EN05-0390-08 224