Firmware upgrades 9810 series - User manual
267 7EN05-0390-08
Option 1 (recommended) – Upgrading using ZIP file
This is the recommended method of upgrading your meter. This method can also be used for
sequential device upgrades.
Any digital and analog outputs associated with your device may change state during a firmware
upgrade.
WARNING
UNINTENDED OPERATION
Failure to follow these instructions can result in death, serious injury, or equipment
damage.
Do not use this device for critical control or protection of persons, animals, property, or
equipment.
Loading firmware or template onto your meter clears the meter’s recorded data.
NOTICE
DATA LOSS
Failure to follow these instructions can result in data loss.
Ensure that all important data has been recorded before uploading firmware or a template to
your device.
1. Start ION Setup.
2. Open the Setup Assistant for your meter.
3. Click Template > Upgrade.
4. Click Upgrade and navigate to the saved upgrade ZIP file.
5. Select the upgrade ZIP file and click Open. The Compressed Device Upgrade Package
window displays the updates to be installed in the order listed.
NOTE: Click the View What’s New PDF link to read about new and updated features
related to the firm upgrade.
To Next Page
Loading...
