6. Select the components you want to upgrade. For example:
9810 firmware V3.0.0 package to be applied in the order listed:
9810_upgradeAgent_V002.001.000.upx (not required if already applied)
9810_V003.000.000.upx
Factory V2.2.0.0.0 template is the meter template that is programmed to the meter
after the firmware upgrade is complete.
Factory V3.0.0 web pages are the files to be uploaded to the meter’s web SFTP folder,
to update the meter webpages with firmware-related changes.
7. Select the desired settings and readings to be retained, if you selected a template
component:
8. Click OK.
9. Click Proceed to start the upgrade process.
9810 series - User manual Firmware upgrades
7EN05-0390-08 268
To Next Page
Loading...
