Cybersecurity 9810 series - User manual
49 7EN05-0390-08
Security capability Description
User credentials and
password robustness
Use a single account to access the meter with a numeric password
for login.
Use multiple user accounts with alphanumeric passwords for login
and configuration changes.
Password range and limit:Any combination of letters and
numbers, up to 16 characters.
Password strength feedback using ION Setup.
User account lockouts and
timeouts
Define user account lockout criteria after unsuccessful login
attempts and define event timeout period.
User privileges
User accounts with variable permissions to read access, test
mode, or configuration privileges.
Webpages
Disable or enable webpages for viewing meter data online using a
web browser (Web Server).
Configuration
Disable or enable ability to configure the meter using:
•
Modbus communications programming or allow read-only
viewing.
•
The display
•
Meter webpages (Web Server programming).
Disable and enable time synchronization.
Password required for broadcast time synchronization
configuration changes using the display or communication
protocols.
Cybersecurity event logs
and reports
Set up cybersecurity event logs and alarms using event priorities.
User access (Advanced security mode only)
The following table lists the Advanced security mode user access details:
Access type Permission
Time Sync Access Set the meter’s time and time synchronization parameters.
Read Access View parameters, except security configuration.
Peak Demand Reset
Access
Reset peak demand values.
Comm Config Access Configure communication settings.
Test Mode Access Switch the meter to test mode, if available with your meter type.
Full Meter Config Access Configure meter settings.
Security Config Access Configure security settings.
User accounts (Advanced security mode only)
The following table lists the Advanced security mode user account details:
To Next Page
Loading...
