Communications 9810 series - User manual
81 7EN05-0390-08
Parameter Value Description
Domain name
Contact your
local network
administrator for
parameter
values.
The Ethernet domain name for the network
that the meter resides on.
Primary DNS
Contact your
local network
administrator for
parameter
values.
The IP address of your network’s primary DNS
server, if your network uses DNS.
Secondary DNS
Contact your
local network
administrator for
parameter
values.
The IP address of your network’s secondary
DNS server, if your network uses DNS.
Parameter Value Description
IPv4 Assignment mode
Stored
DHCP
Stored: The meter uses the IP addresses that
you manually enter for IPv4 (address, subnet
mask and gateway).
DHCP: The meter acquires its IP addresses
from your network’s DHCP server.
Stored IPv4 address
Contact your
local network
administrator for
parameter
values.
The Internet protocol address of your device.
Stored IPv4 Subnet Mask
Contact your
local network
administrator for
parameter
values.
The Ethernet IP subnetwork address of your
network.
Stored IPv4 Gateway
Contact your
local network
administrator for
parameter
values.
The Ethernet IP gateway address of your
network.
IPv4 settings available using the webpages
The webpage also displays the acquired IPv4 settings if the Assignment mode is set to DHCP.
To Next Page
Loading...
