Communications 9810 series - User manual
95 7EN05-0390-08
For example:
ION Setup stores the certificate when using Network mode. In Single Device mode, you must
accept the certificate every time you connect to a device using Secure ION.
Setting the ION protocol connection and port number
When connecting to a device in ION Setup using Single IONDevice mode, ION Setup will try to
connect to the Secure ION port automatically. If your IT infrastructure isn't configured to allow
traffic on the Secure ION port to pass, the device will connect using ION over TCP.
You can override the default ION connection on a device that supports Secure ION by manually
appending the IPaddress connection options to the IPv4 address. Doing so explicitly defines the
connection process.
To Next Page
Loading...
