Siemens VDO DTCO 1381 - Connection Plug B

Service only
5.5 Performing the installation Installation
5 - 28
© Siemens VDO Automotive AG Edition 07/2007
TD00.1381.00 132 102
Connection plug B
Fig. 5 - 15: Connect DTCO 1381 with KITAS 2171
1. Insert the yellow plug (1) of the KITAS sensor cable into the con-
nection plug "B" on the DTCO 1381.
1
blue bl
brown br
yellow ye
gray gr
green gn
light blue lbl
red rd
black blk
white wt
brown-black brblk
red-grey rdgr
The KITAS sensor cable must meet special requirements, see chapter
2.2.6 "KITAS Sensor cable", page 2-19.