Installation of the ADR variant 6.2 Performing the installation
Edition 07/2007 Technical Description DTCO 1381 6 - 9
TD00.1381.00 132 102
6.2.2 Power supply DTCO 1381 (ADR variant)
Fig. 6 - 5: Power supply attachment diagram DTCO 1381 (ADR variant)
1. Separate the vehicle’s battery from the on-board power supply
or
Interrupt the respective power circuit by removing the fuse.
2. Then insert the wire on the DTCO 1381 into the connection
plug "A".
3. Reconnect vehicle battery.
or
Re-insert the fuses.
1
Observe the guidelines in EN 50020 and the connection specifica-
tions of the DTCO 1381for the sizing of the fuse (1) and the
diameter of the wires, see chapter 2.1.3 "Connection specifications",
page 2-5.
To Next Page
Loading...
