Installation and functional test 8.2 Permissible error limits
Edition 07/2007 Technical Description DTCO 1381 8 - 5
TD00.1381.00 132 102
8.2 Permissible error limits
Distance Permissible error limit of the distance measurement (on a distance
of at least 1000 m):
• ± 1 % before installation
• ± 2 % during installation and during the regularly inspections
• ± 4 % during operation
Accuracy (resolution) of the distance measurement:
• at least 0,1 km
Speed In order to achieve a permissible error limit of the displayed speed
during operation of ± 6 km/h, the following influences must be con-
sidered:
• Error limit of ± 2 km/h for input deviations (such as tire devia-
tions)
• Error limit of ± 1 km/h during installation measurements or regu-
larly inspections
From this results the permissible error limit of the speed meas-
urement (with speed between 20 and 180 km/h, characteristic coef-
ficient of the vehicle between 4000 and 25000 pulses/km):
• ± 1 km/h
Accuracy of the speed measurement:
•at least 1 km/h
Due to the data storage resolution, there is another permissible error
limit of ± 0.5 km/h for the speed saved by the recording equipment.
To Next Page
Loading...
