Activation 9.3 Performing the activation
Edition 07/2007 Technical Description DTCO 1381 9 - 9
TD00.1381.00 132 102
Menu navigation after inserting workshop card
If the workshop card does not contain a preferred language or if the
language is not available in the DTCO 1381, the text will appear in
the language of the issuing member state, see chapter 3.2.1
"Selecting the text language", page 3-5.
Step / menu display Explanation / meaning
1 Greeting text; the set local time (16:00) and the UTC time (14:00)
will appear for approximately 3 seconds.
2 The DTCO 1381 is reading the workshop card.
The symbol for the current mode, operational mode, appears and a
progress bar shows that the DTCO 1381 is reading the card.
3 The name of the cardholder appears.
4 Select the number of characters (at least 4, max. 8)
– Select the number of characters with the button or and
– acknowledge with the button .
5PIN entry
" 0" 1. character to be entered will blink:
– Select the first character with the button or and
– acknowledge with the button .
" 0" 2. character to be entered will blink:
– Select the second character with the button or and
– acknowledge with the button .
– Follow the same procedure to enter the other characters of the
PIN.
Correcting an incorrectly entered character or an incorrectly
entered number of characters
– Press the button to move back to the previous character or to
the query for the number of characters,
– use the button or to select the desired character or number
of characters and
– acknowledge with the button .
XFMDPNF
uá 65$
d
.VTUFSNBOO
d
v 1*/áFOUSZáá
EJHJUT
váFOUFSá1*/
$
váFOUFSá1*/
To Next Page
Loading...
