Table of contents Events and faults
13 - 2
© Siemens VDO Automotive AG Edition 07/2007
TD00.1381.00 132 102
Table of Contents
Chapter 13 Events and faults
13.1 General information about messages ........................ 13-3
13.1.1 Messages shown in the display ......................... 13-4
Additional pictograms in the calibration mode ... 13-4
13.1.2 Output of warning messages on the CAN bus .... 13-5
13.1.3 Output of warning messages to info interface ... 13-5
13.2 Displaying the event and fault memory ..................... 13-6
13.2.1 Driver 1 or driver 2 (inserted tachograph card) .. 13-6
13.2.2 Vehicle (data memory) ..................................... 13-7
13.3 Printing the event and fault memory ......................... 13-8
13.3.1 Driver 1 or driver 2 (inserted tachograph card) .. 13-8
13.3.2 Vehicle (data memory) ..................................... 13-9
13.4 Messages and troubleshooting measures ................ 13-10
13.4.1 Overview of the messages .............................. 13-11
13.4.2 Operational messages ..................................... 13-14
13.4.3 Work-time warning messages ......................... 13-19
13.4.4 Fault warning messages .................................. 13-20
13.4.5 Event warning messages ................................. 13-27
13.4.6 Security breach warning messages .................. 13-32
13.4.7 Other events and faults ................................... 13-35
To Next Page
Loading...
