Events and faults 13.1 General information about messages
Edition 07/2007 Technical Description DTCO 1381 13 - 5
TD00.1381.00 132 102
13.1.2 Output of warning messages on the CAN bus
The DTCO 1381 sends the status of the tachograph as part of the
TCO1 message (error status, data byte 4).
Warning messages will be sent as "System Event (SE)".
13.1.3 Output of warning messages to info interface
The DTCO 1381 sends the status of the tachograph as part of the
data information (error status, data byte 12).
Warning messages will be sent as "System Event (SE)".
The error status is emitted on the CAN bus until the warning
message is acknowledged by pressing the button .
Certain warning messages will be cyclically emitted on the CAN bus
until the cause has been remedied or is no longer active.
The error status is emitted on the info interface until the warning
message is acknowledged by pressing the button .
Certain warning messages will be cyclically emitted on the info
interface until the cause has been remedied or is no longer active.
To Next Page
Loading...
