Events and faults 13.4 Messages and troubleshooting measures
Edition 07/2007 Technical Description DTCO 1381 13 - 15
TD00.1381.00 132 102
{oáá QSJOUPVUá
EFMBZFE
00000005B3 A printout will be delayed or cancelled.
Possible causes
• Printing head has overheated
Measures
– After a long printout, the print head temperature is too high;
wait to cool.
The printout will automatically continue as soon as these param-
eters are again within the specified range.
If the error message continues to appear despite these measures,
replace the DTCO 1381.
{oáá ESBXFSáPQFO 00000005B3 In one of the following situations it is determined that the printer
drawer is open:
• withdrawing a tachograph card
• requesting a printout
• during a printout
The ejection of the tachograph card is delayed until the printer
drawer is closed. A printout in progress will be interrupted or any
print request will be rejected.
Possible causes
• Printer drawer is open
Measures
– Check whether the printer drawer is open and closed if nec-
essary.
If the error message continues to appear despite these measures,
replace the DTCO 1381.
{o OPáQBQFS 8000000660 It is determined during a printout or during a print request that
there is no paper in the printer. The printout in progress is inter-
rupted and the previously printed part automatically marked or the
print request is rejected.
Possible causes
• No printer paper has been inserted
• All printer paper has been used
Measures
– Check whether there is paper in the printer and insert a new
roll if necessary.
After a new roll of printer paper is inserted, it will be automatically
marked and the interrupted printout will be continued
If the error message continues to appear despite these measures,
replace the DTCO 1381.
DTCO 1381 display
Picto. Error text MC Error code Meaning, cause and measures
To Next Page
Loading...
