EDM eco
Operating instructions Unit settings
TU00-1404-0311020 © Siemens VDO Trading GmbH 33
Edition 11/2003
English
2 Select the required menu items (-> 31):
– If you wish to activate or change the driver PIN number: 86(U6HW83>3L Q 8 6( 5
(-> 27).
– If you wish to activate or change the system PIN number: 6\6W(6HW83>3LQ
6\6WH(-> 27).
If system PIN protection has already been activated, you will automatically be
asked to enter the PIN number (-> 24).
3 Select the required figure using the key (0 - 9).
4 Switch to the next figure using the key.
5 Repeat steps 3 and 4 until all 4 digits have been selected.
6 Confirm the PIN number using the key.
7 After you have completed all entries, press the key until you return to the
normal display mode.
8 For reasons of security make a note of your PIN number and keep it in a safe
place.
To Next Page
Loading...
