Siemens VDO EDM eco Release II - Setting date and time

EDM eco
Operating instructions Unit settings
TU00-1404-0311020 © Siemens VDO Trading GmbH 37
Edition 11/2003
English
Setting r.p.m. warning/ Changing gear warning
Using the EDM eco you can specify an engine speed alarm value. If this alarm value is exceeded,
the driver receives an audible and visual warning signal (-> 20) to tell him to change to the next
gear up.
Set the upper revolutions limit for the economical (green) range as the alarm value for engine
speed.
If you wish to deactivate the r.p.m. warning, simply reset the alarm value to "0000".
1 Press the key and the key at the same time to switch to the unit
settings.
The first menu item 86(U6HW83 will be displayed automatically.
2 Select the6\6W(6HW83>6HW836\6W(>U30$6HW83(-> 27) menu item
(-
> 31).
If PIN protection has already been activated, you will automatically be asked
to enter the system PIN number in the place indicated (-> 24).