Siemens VDO EDM eco Release II - Switching units

EDM eco
Unit settings Operating instructions
38 © Siemens VDO Trading GmbH TU00-1404-0311020
Setting date and time
The date and time is set using:
• \($5 - year number (e. g. "3" for the year 2003)
• P2QW+ - month (e. g. "6" for June)
• G$< - day (e. g. "15" for the 15th of the month)
• +28U - hours (e. g."13" for 1 o’clock in the afternoon)
• 0LQ8W - minutes (e. g."28" for 28 minutes).
3 You can set the required alarm value for engine speed:
– either by entering the value at &RQ6WU30$>&RQ6W.
Values are entered in the same way as PIN numbers (-> 24).
– or by starting off directly with &$/U30$>&$/.
Let the engine run at idle. The r.p.m. alarm value is automatically set to 2.5
times the idle speed.
4 Confirm the value using the key.
5 After you have completed all entries, press the key until you return to the
normal display mode.