Siemens VDO EDM eco Release II - Calibration values for fuel consumption and distance travelled

EDM eco
Operating instructions Unit settings
TU00-1404-0311020 © Siemens VDO Trading GmbH 39
Edition 11/2003
English
Switching units ([km, l], [miles, US gallons], [miles, UK gallons])
There are 3 different units available for the consumption display unit:
• 6,8Q,W6 - Standard International with kilometres and litres [km, l]
• 868Q,W6 - American with miles and US gallons [miles, US gallons]
• EULW8Q,W6 - British with miles and UK gallons [miles, UK gallons].
1 Press the key and the key at the same time to switch to the unit
settings.
The first menu item 86(U6HW83 will be displayed automatically.
2 Select the6\6W(6HW83>6HW836\6W(>&/2&N6HW83(-> 27) menu item (-> 31).
If PIN protection has already been activated, you will automatically be asked
to enter the system PIN number in the place indicated (-> 24).
3 Enter the required values for the date and time.
Values are entered in the same way as PIN numbers (-> 24).
4 Confirm each entry using the key.
5 After you have completed all entries, press the key until you return to the
normal display mode.