Siemens vs06g series - Replacing the micro-hygiene filter; Replacing the micro active carbon filter

16
Changing the dust bag en
Replacing the micro-hygiene filter
The micro-hygiene filter should be changed: when
starting a newpack of bags
䡲
Open the dust bag compartment lid.
䡲
Release the filter holder by moving the locking lever
in the direction of the arrow.
䡲
Remove the micro-hygiene filter. Insert the new
micro-hygiene filter into the vacuum cleaner.
䡲
Reinsert the filter holder and clip into place.
Replacing the micro active carbon filter
If your vacuum cleaner is equipped with a micro active
carbon filter, this should be replaced every six months.
䡲
Open the dust bag compartment lid.
䡲
Release the filter holder by moving the locking lever
in the direction of the arrow.
䡲
Remove the micro active carbon filter.
䡲
Insert the new micro active carbon filter.
䡲
Reinsert the filter holder and clip into place.
Downloaded from www.vandenborre.be