ENSiemens Building Technologies A6V10816676_----_d 105
Operation
Open the fast readout display loop
The display is always off as standard (sleep mode).
Press the <H> key or the <V> key
Display test -
everything on
0.5 sec
.
Current value
5 sec.
Due date
5 sec.
Due date value
5 sec. pulsating
Display test -
everything off
0.5 sec
10 x
The fast readout display starts
with the current consumption
value.
After 10 repetitions, the display
automatically changes back to
sleep mode.
You can change to the level op-
erating scheme at any time. To
do so, press the < H > or < V >
key for longer than 3 seconds.
Level operating scheme of the standard levels
Press the <H> key or the < V > key for longer than 3 seconds.
To change the level: Press the < H > key
To change menus:
Press the < V > key
To Next Page
Loading...
