Siemens WM14NK08GB - Page 21

Display en
21
Display Designation More information
End End of pro-
gramme
Programme status
Childproof lock ¡ lights up: The childproof lock is activ-
ated.
¡ flashes: The childproof lock is activated
and the appliance has been operated.
→"Deactivating the childproof lock",
Page31
Crease-reduction
function
The crease-reduction function is activated.
→"Buttons", Page22
Prewash Prewash is activated.
→"Buttons", Page22
varioSpeed Short wash activated.
→"Buttons", Page22
⁠ Voltage control
system
Flashes: The automatic voltage control
system detects impermissible voltage
drops. This will pause the programme.
Note:The programme will continue when
the voltage is permissible again.
⁠ Voltage control
system
Flashes: The programme has been
paused because of impermissible voltage
drops. The voltage is permissible again
and the programme will continue.
Note:The programme duration is exten-
ded.
Door ¡ Lights up: The door is locked and can-
not be opened.
¡ Flashes: The door is not closed prop-
erly.
¡ Off: The door is unlocked and can be
opened.
Tap ¡ No water pressure.
¡ The water pressure is too low.
E:35 / -10
1
Error Error code, error display, signal.
1
Example