Siemens WM14VMH4GB - Page 53

Cleaning and servicing en
53
1. Remove the water inlet hose from
the tap.
2. Clean the filter with a small brush.
3. Connect the water inlet hose and
check for leaks.
Cleaning the filter on the
appliance
Note:Please read the information in
the Safety →Page4 and Preventing
material damage →Page10 sections
to ensure that you use the appliance
safely.
Requirement:The water inlet hose is
empty.
→"Emptying the water inlet hose",
Page52
1. Disconnect the hose from the rear
of the appliance.
1
2
2. Use pliers to remove the filter.