16
You can use the displayed presettings or adjust the selected
programme optimally to the items of washing by changing the
presettings or selecting additional settings/options.
Ø Changing the Temperature (°C) Spin (0) , Finish in (h).
Refer to ~ Page 27:
e.g. selecting and changing the Temperature (°C) :
The arrows on the display panel indicate which buttons are
used to change the settings. The settings are active without
acknowledgement and are displayed in the main menu.
²
– If the buttons are held down, the set values automatically run
through.
– The respective programme duration is displayed by selecting
the programme. The programme duration is adjusted while
the programme is running if the programme duration requires
changing, e.g. due to changes in the programme settings/
options, foam detection, unbalanced load detection, the load
or soiling.
Ø ecoPerfect ¦:
for saving energy with a comparable washing effect to the
standard programme. When selected, the display lamp is lit.
²
The washing temperature is lower than the selected tempera-
ture. For special hygiene requirements, the Hygiene program
is recommend. ~ Page 24
speedPerfect G:
for a shorter wash time with a comparable washing effect to
the standard programme. Observe maximum load.
~ Page 22
When selected, the display lamp is lit.
cc c
˜
70
60°C
16000 2:31h
50
bb b
To Next Page
Loading...
