19
Ø Topping up washing
When the programme has started, washing can be reloaded
or taken out as required.
Select Ü (Start/Pause).
²
– If there is a high water level, high temperature or if the drum
is rotating, the washing machine door remains locked for
reasons of safety and reload is not possible. Follow the
information on the display panel. To continue the pro-
gramme, select the Ü (Start/Pause) button. The washing
machine door is locked and the programme continues
automatically.
– Load display is not active during relosding.
– Do not leave washing machine door open for a prolonged
period – water could run out of the washing.
Ø Changing the programme sequence
if you have mistakenly started a wrong programme:
1. Select Ü (Start/Pause).
2. Select another programme.
3. Select Ü (Start/Pause). The new programme starts from
the beginning.
Ø Cancelling the programme
For programmes at high temperature:
1. Select Ü (Start/Pause).
2. Cool down washing: select Rinse/Freshen Up
(see Others).
3. Select Ü (Start/Pause).
For programmes at low temperature:
1. Select Ü (Start/Pause).
2. Select Spin or Drain.
(see Others)
3. Select Ü (Start/Pause).
cc
˜
60°C
1600
0
2:31h
Pause: Reload is possible
bb
To Next Page
Loading...
