17
Ø Change Temperature, Spin, Finish in time:
Selecting and changing e.g. the Temperature:
The arrows on the display panel indicate which buttons are
used to change the settings. The settings are active without
acknowledgement and are displayed in the main menu.
²
– If the buttons are held down, the set values automatically run
through.
– The respective programme duration is displayed by selecting
the programme. The programme duration is adjusted while
the programme is running if the programme duration requires
changing, e.g. due to changes in the programme settings/
options, foam detection, unbalanced load detection, the load
or soiling.
Ø ecoPerfect ¦:
For saving energy with a comparable washing effect to the
standard programme. When selected, the display lamp is lit.
Ø speedPerfect G:
For a shorter wash time with a comparable washing effect to
the standard programme. Observe maximum load. Refer to
When selected, the display lamp is lit.
Ø ß Options. Overview of all options ~ Page 32
Select ß Options and e.g. z Water Plus button:
– Select option by pressing the two buttons displayed on the
left.
cccc
70
60°C
i-Dos
iIô ©
i-Dos øø ô ¨
1400B 2:31
h
50
bb b
60°C
1400
B
2:31h
z
Extra rinse
zWater Plus on è
Rinse Hold
bcbc
To Next Page
Loading...
