27
3.
Select Start/Reload Ü. Programme stops before last rinse
cycle.
4.
Dose textile-guard agent (max. 170 ml) in dispenser À Á.
5.
Select Start/Reload Ü. After-treatment of the washing
according to manufacturer’s instructions.
Starching
²
The washing should not be treated with fabric softener.
Select Rinsing programme.
Manually dose liquid starch into dispenser À Á (if required,
clean beforehand) according to manufacturer’s instructions.
Select Start/Reload Ü.
Dyeing/Discolouring
Dye in household quantities only. Salt may attack stainless
steel!Observe specifications of the dye manufacturer! Do not
discolourwashing in the washing machine!
Soaking
1.
Dose detergent with i-Dos or pour into dispenser À Á
according to manufacturer’s instructions.
2.
Set programme selector to Cotton 30 °C and select
Start/Reload Ü.
3.
After approx. 10 minutes select Start/Reload Ü to stop the
programme.
4.
After the required soaking time reselect Start/Reload Ü,
if the programme is to be continued or change the
programme.
²
Insert washing of the same colour. No additional detergent
required, the soaking solution is used for washing.
Rinse hold reached:
Please add to detergent drawer
À
the water proofing agent
and then select "start"
To Next Page
Loading...
