Transporting the appliance en
41
4. Select any programme.
5. Press Start/Pause Ü.
6. Wait for 5 minutes.
The condensation water will be drained.
7. Empty the condensation container
again.
8. Switch off the appliance.
9. Disconnect the appliance's mains
plug from the power supply.
The appliance is now ready to be
transported.
Caution!
Risk of material damage/damage to the
appliance
Despite draining, there will always be
some residual water in the appliance.
Any residual water may leak out and
cause material damage.
The appliance should therefore be
transported upright.
To Next Page