Need help?Do you have a question about the Sienci Labs LongMill MK2 and is the answer not in the manual?
Explains the contents of the LongMill box and manual layout.
Lists essential tools for assembly.
Provides guidance on handling missing or broken components.
Offers advice for a smoother assembly process.
Defines axis notation used in the manual for clarity.
Encourages joining the online community for support.
Details preparation of ACME and anti-backlash nuts for the axes.
Describes the assembly of the Z-axis motor mount with bearings.
Details the assembly of the Z-axis lead screw and coupler.
Explains the assembly of V-wheels onto the XZ-gantry.
Shows how to attach anti-backlash nuts to the Z-gantry.
Guides connecting the Z-axis motor mount to the XZ gantry.
Covers mounting the router holder to the Z-gantry.
Details attaching V-wheels to the Y-axis gantries.
Explains attaching anti-backlash nuts to the Y-gantries.
Guides the assembly of middle feet onto the Y-axis rails.
Covers attaching end feet and Y-gantry plates to the Y-rails.
Details threading lead screws into the Y-axis assemblies.
Attaches drag chain mounts and connects X-axis rail to Y-gantry.
Guides connecting the XZ-gantry to the X-axis rail.
Details threading the X-axis lead screw.
Covers mounting the NEMA 23 stepper motors to the axes.
Details the preparation and attachment of drag chain ends.
Explains how to adjust drag chain length and route wires.
Guides the installation of the router onto the mount.
Guides electrical connection and checks before powering on.
Details connecting the CNC to a computer using gSender.
Explains how to adjust V-wheels and anti-backlash nuts for smooth motion.
Discusses requirements for the mounting surface and wasteboard.
Provides key dimensions for mounting.
Details the process of securing the machine to the surface.
General| Machine Type | CNC Router |
|---|---|
| Drive System | Lead Screw |
| Communication | USB |
| Warranty | 1 year limited warranty |
| Frame Material | Aluminum Extrusion |
| Controller | GRBL |
| Software Compatibility | Easel |
| Repeatability | 0.01 mm |
| Spindle Speed | 10, 000 RPM (varies by spindle) |
| Material Compatibility | Wood, Plastic, Aluminum |
| Power Requirements | 110V or 220V (varies by spindle) |
| Lead Screw Type | ACME |
| Spindle | Router or spindle motor |
To Next Page