To Next PageTo Next Page
Need help?Do you have a question about the Sierra Monitor Corporation 5100-03-IT and is the answer not in the manual?
General| Model | 5100-03-IT |
|---|---|
| Manufacturer | Sierra Monitor Corporation |
| Output | 4-20 mA |
| Power Supply | 24 VDC |
| Enclosure Rating | NEMA 4X |
| Protocols | Modbus RTU |
| Mounting | Wall or pipe mount |
| Type | Gas Detector |
| Range | 0 to 100% LEL |
| Humidity Range | 0 to 95% RH, non-condensing |
Overview of the gas sensor module's features, including display, calibration frequency, approvals, and communication interfaces.
Critical precautions for electrical wiring to prevent interference and ensure proper connection.
Steps for powering up the module and initial operation sequence.
Guidelines for optimal placement of sensor modules based on gas density and accessibility.
Detailed wiring requirements for Analog, Modbus, and Sentry interfaces.
Configuration options for alarms, relays, gas range, and communication settings.
Recommended schedule for recalibrating the gas sensor module.
Step-by-step guide through the calibration process menu.
Procedures for replacing the transmitter assembly if it becomes unreliable.
Steps for replacing the gas sensor when issues like CAL-FAIL occur.
Comprehensive guide to diagnose and resolve module issues and faults.
Detailed technical specifications for various sensor models and module features.
Certificate details for FM Approval, including specifications and compliance.
Documentation regarding SIL-2 certification and failure analysis for the detectors.
