10
Turning Sight On and O
• Turn the sight ON by pressing and holding the ▲ (UP) brightness button for over 1
second. Turn the sight OFF by repeating the same procedure.
• FOR CIRCLE/DOT MODELS ONLY - To cycle through the reticles (dot, circle, and
circle/dot combination) press and hold the ▼ (DOWN) brightness button for over 1
second. Release the button when the desired reticle is being displayed.
• The ROMEO-X features MOTAC (Motion Activated Illumination System). If the
illuminated reticle does not detect motion for 2 minutes, it automatically shuts
off. The instant the optic detects motion, it powers on returning to the previous
brightness and reticle setting.
• The ROMEO-X has 15 brightness settings, 12 daylight and 3 night vision. While the
sight is ON, increase the brightness of the reticle by pressing and releasing the ▲
(UP) brightness button until the desired brightness level is reached. To decrease
the brightness, press and release the ▼ (DOWN) brightness button. The reticle will
blink 5 times when the highest or lowest setting is reached.
To Next Page
Loading...
Need help?
General
