Sight mark Ghost Hunter - Caution; Using the Head Mount

6
CAUTION:
Your binocular can be used in extreme cold. However, when the unit is brought back into a warm environment, please
wait approximately 2-3 hours before using the unit again. Failure to do so may result in damage as a result of conden-
sation accumulating on the internal circuitry of the unit..
USING THE HEAD MOUNT
The Ghost Hunter 1x24 night vision binocular includes a compact head mount. This allows hands-free operation of
the night vison device in partial and complete darkness. The head mount ensures stable positioning of the Ghost
Hunter 1x24 in front of the user’s eyes, even while in fast motion (pacing, runing, and abrupt movements). The Head
Mount is simple and convenient to use. All adjustments on the head mount can be made with one hand, such as the
90º tilt function. In order to operate:
• Adjust the size of the mask to t your head using the straps. The head mount must
closely t your head.
• Ax the night vision device to the adapter (7) using the screw (6).
• To adjustthe position of the unit relative to the eyes, loosen the knobs (8), (9) and move
the unit longitudinally, upwards and downwards adjusting its inclination angle. As you
nd the most comfortable position, tighten the knobs (8), (9) to x the setting.
• To watch objects without the unit, place the unit vertically by
pressing and holding the button (10). Next, swing the unit up until
the unit clicks and locks in place. Press and hold the button (10) again
and swing in a downward motion to bring the unit to its original
position.
• When you are nished using the unit, remove the night vison
device from the adapter and remove the heard mount from the
user’s head.
6
7
8
9
6
7
8
9
10