SIGLENT SDG1032X User Manual

User Manual
SDG1000X Series Function/Arbitrary Waveform Generator
UM0201X-E01A
2016 SIGLENT TECHNOLOGIES CO., LTD

SIGLENT SDG1032X Specifications

General

Model	SDG1032X
Category	Portable Generator
Output Channels	2
Waveform Types	Sine, Square, Ramp, Pulse, Noise, Arbitrary
Sample Rate	150 MSa/s
Vertical Resolution	14 bits
Arbitrary Waveform Length	16 kpts
Output Impedance	50 Ω
Power Supply	100 - 240 VAC, 50/60 Hz
Weight	3.2 kg
Frequency Range	1 µHz to 30 MHz
Modulation	AM, FM, PM, FSK, PWM
Interface	USB, LAN

Summary

General Safety Summary

Safety Precautions

Essential precautions to avoid personal injury and instrument damage during operation.

Safety Terms and Symbols

Terms Used on the Instrument

Definitions of terms like DANGER, WARNING, and CAUTION.

Symbols Used on the Instrument

Explanation of safety symbols on the instrument.

Introduction to SDG1000X

Key Features

Highlights the main capabilities and specifications of the SDG1000X.

Quick Start

Handle Adjustment

Instructions for adjusting the instrument's carrying handle.

The Front/Rear Panel

Overview of the instrument's front and rear panel interfaces.

To Select a Waveform

Guide to selecting different waveform types like Sine, Square, etc.

To Set Modulation/Sweep/Burst

Instructions for setting modulation, sweep, and burst functions.

To Turn On/Off Output

Procedures for enabling and disabling the instrument's output.

To Use Numeric Input

Explanation of using the numeric keyboard and knob for input.

To Use Common Function Keys

Description of key functions like Parameter, Utility, Waveforms.

Front Panel Operations

To Set Sine Waveform

Detailed steps for configuring sine waveform parameters.

To Set Square Waveform

Detailed steps for configuring square waveform parameters.

To Set Ramp Waveform

Detailed steps for configuring ramp waveform parameters.

To Set Pulse Waveform

Detailed steps for configuring pulse waveform parameters.

To Set Noise Waveform

Detailed steps for configuring noise waveform parameters.

To Set DC Waveform

Detailed steps for configuring DC waveform output.

To Set Arbitrary Waveform

Guide to setting up arbitrary waveforms, including built-in types.

To Set Harmonic Function

How to generate and configure harmonic waveforms.

To Set Modulation Function

Overview and setup for various modulation types (AM, FM, etc.).

To Set Sweep Function

Instructions for configuring the sweep function.

To Set Burst Function

Instructions for configuring the burst function.

To Store and Recall

Procedures for saving and loading instrument states and waveforms.

To Set Utility Function

Guide to configuring system, interface, and other utility settings.

Examples

Example 1: Generate a Sine Waveform

Step-by-step guide to generating a sine waveform with specific parameters.

Example 2: Generate a Square Waveform

Step-by-step guide to generating a square waveform with specific parameters.

Example 3: Generate a Ramp Waveform

Step-by-step guide to generating a ramp waveform with specific parameters.

Example 4: Generate a Pulse Waveform

Step-by-step guide to generating a pulse waveform with specific parameters.

Example 5: Generate a Noise

Step-by-step guide to generating a noise waveform with specific parameters.

Example 6: Generate a DC Waveform

Step-by-step guide to generating a DC waveform with specific parameters.

Example 7: Generate a Linear Sweep Waveform

Guide to generating a linear sweep waveform with specified parameters.

Example 8: Generate a Burst Waveform

Guide to generating a burst waveform with specified parameters.

Example 9: Generate an AM Modulation Waveform

Guide to generating an AM modulated waveform with specific settings.

Example 10: Generate a FM Modulation Waveform

Guide to generating an FM modulated waveform with specific settings.

Example 11: Generate a PM Modulation Waveform

Guide to generating a PM modulated waveform with specific settings.

Example 12: Generate a FSK Modulation Waveform

Guide to generating an FSK modulated waveform with specific settings.

Example 13: Generate an ASK Modulation Waveform

Guide to generating an ASK modulated waveform with specific settings.

Example 14: Generate a PSK Modulation Waveform

Guide to generating a PSK modulated waveform with specific settings.

Example 15: Generate a PWM Modulation Waveform

Guide to generating a PWM modulated waveform with specific settings.

Example 16: Generate a DSB-AM Modulation Waveform

Guide to generating a DSB-AM modulated waveform with specific settings.

Troubleshooting

General Inspecting

Steps for inspecting the instrument upon receiving it.

Troubleshooting Common Issues

Solutions for common problems like dark screen or no waveform output.

Service and Support

Maintenance Summary

Overview of SIGLENT's warranty and repair policy.

Contact SIGLENT

Contact details for SIGLENT support and sales.

Appendix

Appendix A: Accessories

List of standard and optional accessories for the instrument.

Appendix B: Daily Maintenance and Cleaning

Guidelines for routine maintenance and cleaning of the instrument.